Visonic SMD-426 PG2 无线双向光电烟雾探测器（PowerG/PowerMaster 报警系统配件，库存全新带盒）

SKU

BJ240222-043

Skip to the end of the images gallery

Skip to the beginning of the images gallery

¥145.27

有货

库存 238 件

Visonic SMD-426 PG2 PowerG Wireless Two-way Photoelectric Smoke Detector (New Old Stock, Boxed)

BJ240222-043 N11-1C 对面 XYF

买 ¥138.70 每个 5 和 save 5%
买 ¥131.40 每个 10 和 save 10%
买 ¥124.10 每个 50 和 save 15%

分类: 家庭日用, 工业技术, Default Category

Ship to

Worldwide

15 Days Return

If goods have problems

Secure Payment

USD and RMB accepted

24/7 Support

Dedicated support

详情

Visonic SMD-426 PG2 无线双向光电烟雾探测器（PowerG/PowerMaster 报警系统配件，库存全新带盒）

型号：Visonic SMD-426 PG2（同系列 SMD-426/427 PG2），渠道库存，带原盒、说明书、安装底座及配件（见图）。
用途：专业安防报警系统配件，光电烟感，探测火灾烟雾并现场警报（85dB）+ 无线回传主机；采用 PowerG 双向加密技术，防窃听/防干扰，适配 Visonic PowerMaster 系列无线报警主机（非独立烟感，需配对主机）。
特性：自检测、防拆、低电提示，电池寿命长（老库存建议到手检查/更换电池），不可涂漆（DO NOT PAINT），符合欧标/美标消防认证。
状态：库存全新未使用（外盒有存放痕迹），配件齐全；警示：需专业安装，需兼容主机，电池可能老化。
注意：安防消防配件，非假退（正品原厂，非真假问题不退，描述不符可协退）；不承诺适配所有报警系统，买前请核对主机型号（须 PowerG/PowerMaster）；电池老化非质量问题，介意慎拍。

Model: Visonic SMD-426 PG2 (SMD-426/427 PG2 series), 100outlets old stock, boxed w/ manual, mount base & accessories.
Use: Pro security alarm add-on; photoelectric smoke detection, 85dB local alarm + wireless transmit to panel; PowerG 2-way FHSS/AES-128 encryption, fits Visonic PowerMaster series alarm systems (NOT standalone, needs compatible panel).
Features: Self-testing, tamper, low-battery, long battery life (old stock: advise battery check/replace), DO NOT PAINT, EN/UL certified.
Cond: NOS, unused (box wear), complete; pro install req; needs compatible panel.
Note: Fire security part; authentic OEM (no return except authenticity/mismatch); verify panel compatibility (PowerG/PowerMaster); battery aging normal for old stock, You may need a new Battery: 3V CR123A
Made in Taiwan.

Item location: China. Welcome wholesale.

SMD-426 PG2 (photoelectric smoke detector) is an automatic fire detector with integral audible signal for open area protection, designed to sense smoke (not flame) and fitted with a PowerG type transceiver.

SMD-426 PG2 provides early warning of developing fire by sounding an alarm with its built-in alarm horn, and by transmitting a coded alarm signal to a PowerG receiver or to a compatible wireless alarm control panel.

It must be borne in mind, though that effective pre-warning of fire accidents is only possible if the detector is located, installed and maintained as described here.

In alarm condition, the buzzer sound can be stopped for 12 minutes by pressing the

TEST/MUTE switch. It will not restore the alarm condition, but will temporarily silence the

buzzer while you correct the condition. After 12 minutes, the detector restarts the alarm

buzzer sound.

Note: The TEST/MUTE switch functions as TEST switch (in normal operation) or as MUTE switch (in alarm condition).

The detector can also operate as a siren to indicate a fire alarm in other areas covered by

the alarm system, or to indicate burglar alarm events, as configured through the control panel (see the PowerMaster Installer Guide).

The tamper switch actuator (Figures 9a and 9b) is pressed against the bracket when the unit is attached to the bracket. Removal of the unit from the bracket causes the switch contacts to open, creating a tamper event, which is reported by the transceiver to the alarm system control panel.

Note: When the tamper switch is opened the detector becomes not ready for operation.

昵称

摘要